Complete list of Domain and IP of the access from Dynatrace server to the internet

Question

Question by ROBERTA D. · Sep 05, 2018 at 02:56 PM · configuration Dynatrace Managed dynatrace saas

Complete list of Domain and IP of the access from Dynatrace server to the internet

Hello,
I would like to install dynatrace, so I can communicate with the dynatrace server and I need the IP addresses to connect it to.
Thank you

0

10 |2000000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 50.0 MiB each and 250.0 MiB total.

Answer 1 · 2018-09-06T07:02:06Z

Answer by ROBERTA D. · Sep 06, 2018 at 07:02 AM

Thank joseph , I use a SaaS instance.

0 Show 1 · Share

10 |2000000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 50.0 MiB each and 250.0 MiB total.

Joseph H. · Sep 06, 2018 at 08:55 PM 0

Share

For a SaaS instance, the IP address varies depending on your instance location. To find your personal IP addresses, select the Deploy Dynatrace -> Start Installation -> select your platform, and at the bottom of the page will be a list of your IPs.

Answer 2 · 2018-09-05T20:48:20Z

Answer by Radoslaw S. · Sep 05, 2018 at 08:48 PM

Is that what you need ?

Your Dynatrace Managed clusters must be able to communicate with Mission Control (URL: https://mcsvc.dynatrace.com¹ and IP addresses: 52.5.224.56, 52.200.165.10, 52.221.165.63, and 13.228.109.33) via HTTPS (port 443) for license validation, health monitoring, and automatic updates. Communication between Dynatrace Managed clusters and Mission Control is based on TLS v1.2.

To enable health monitoring, your Dynatrace Managed Server must also have access to *.live.dynatrace.com (IP addresses 34.203.81.189, 34.205.222.178, 54.164.42.22, 52.1.155.152, and 54.164.49.176) via HTTPS (port 443).

0 Show 1 · Share

10 |2000000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 50.0 MiB each and 250.0 MiB total.

Joseph H. · Sep 05, 2018 at 09:14 PM 0

Share

Roberta, Radoslaws response is for those running a Managed onpremise instance of Dynatrace. If you are using a SaaS tenant of Dynatrace, it depends on which data center your tenant is located. So if you have further questions, please be sure to clarify whether you're asking about a Managed instance or a SaaS instance.

Answer 3 · 2018-09-05T14:59:45Z

Answer by Vlad S. · Sep 05, 2018 at 02:59 PM

Hi! Here is a link https://www.dynatrace.com/support/help/deploy-dyn...

Please check the last section

https://www.dynatrace.com/support/help/shortlink/managed-network-ports#outbound-communication-to-dynatrace-mission-control

0 Show 1 · Share

10 |2000000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 50.0 MiB each and 250.0 MiB total.

ROBERTA D. · Sep 05, 2018 at 03:47 PM 0

Share

Thanks, but I need a ip for to link in server dynatrace,one is 54.77.219.214 , and I need other three IP I can not download the dynatrace server

Complete list of Domain and IP of the access from Dynatrace server to the internet

3 Replies

How to get started:

NAM 2019 SP3 is available

LIVE WEBINAR

Follow this Question

Related Questions

Forum Tags